Free estimates across the Des Moines metro. Most jobs scheduled within the week.
Serving 24 metro cities in Polk, Dallas and Warren counties
Des Moines Stump Grinding  ›  Service areas  ›  Stump grinding in Grimes, IA
Stump grinding & removal · Grimes, Iowa

Stump grinding in Grimes, red maple country.

Grimes sits on Highway 141 with a small old core and a lot of 1990s and 2000s subdivisions, and the trees tell you which part of town you are in. The newer blocks are red maple and ornamental pear, the older streets have silver maple and walnut, and both are dropping trees in ice storms now.

  • Free estimate in Grimes
  • Most jobs within the week
  • Cleanup included
Grind depth quoted in inches. 811 locate before every job.

Get a free estimate

Three fields. We call you back with a price, usually the same day.

No obligation. We don't sell your information. If the form gives you trouble, email tylerthovey@gmail.com with your ZIP.

Stump grinding in Grimes, Iowa
Tree coverRed maple, silver maple, ornamental pear, green ash, arborvitae
Typical stump8 to 20 inches on newer lots, 30 to 40 inches on the older streets
AccessNarrow side yards, new sod, invisible fences, HOA landscaping rules
Local detail

What Grimes stumps are actually like.

Red maples were planted on nearly every lot built in Grimes since the 1990s. They grow fast, root shallow, and split under ice, which is why so many are being taken out and leaving a stump behind. Our grinders fit the side yards between those houses, which are narrower than they look on a plat map.

We grind 6 to 8 inches below grade as standard, deeper if you are replanting or setting a post. Grindings go back in the hole and get raked level, and the driveway gets blown off before we leave.

Neighborhoods we cover

  • Downtown Grimes
  • The blocks off 1st Street
  • Subdivisions north of Highway 141

Side yards between newer Grimes houses are often just wide enough for a 36 inch grinder. Send the gate or gap width and we confirm before the day of the job.

Grimes stump profileWhat it means for your job
Housing era1890s to 1970s in the old core, 1990s to 2020s in the subdivisions
Common speciesRed maple, silver maple, ornamental pear, green ash, arborvitae
Typical stump8 to 20 inches on newer lots, 30 to 40 inches on the older streets
AccessNarrow side yards, new sod, invisible fences, HOA landscaping rules
Trees and stumps

The stumps you are most likely to have in Grimes.

Species matters more than people expect: it decides how hard the wood is, how wide the base spreads, and how long the roots sit in the ground before they rot.

Red maple

Planted across nearly every subdivision built since the 1990s. Shallow rooted, first to split in an ice storm, and usually 12 to 24 inches at the base. Fast to grind and the most common stump we see on newer lots.

Silver maple

The big one. Wide root flare, soft wood, often 36 to 48 inches at the base even when the trunk looks smaller from the street. Grinds fast for its size, and the roots keep a hump in the lawn for years.

Ornamental pear

The builder tree of choice. Shallow roots, brittle in ice, usually 8 to 14 inches at the base. Ten of them along one driveway grind in a single pass.

Green ash

Abundant across the metro and dying off. Ash goes punky in the center a year or two after the tree comes down, which grinds easily. The grindings can stay on site, the borer does not survive the grinding.

Sizing it up

How big is your stump, and what does that change?

Diameter at the base is the number that drives time, chips and equipment. Measure across the widest point where the trunk meets the ground, not the height.

Stump sizeWhat it usually takesWorth knowing
Under 12 inMostly ornamental and builder stumps. 15 to 30 minutes, half a wheelbarrow of chips.Cheapest per stump, especially several in one yard.
12 to 24 inThe most common residential stump in the metro. 30 to 45 minutes, about one wheelbarrow.Standard 6 to 8 inch grind, grass comes back over it.
24 to 36 inMature yard trees. 45 to 90 minutes, two to three wheelbarrows.Ask about hauling if the chips would sit in view.
36 in and up, or multi-stemOld silver maple, elm, walnut, and multi-trunk ornamentals. One to three hours, three or more barrow loads.Depth matters here. Replanting or setting a post means grinding deeper.
Time bands are typical, not a promise. Access, depth and what is buried nearby all move them. If you are not sure how wide yours is, put a tape measure or a shovel across the base in the photo and we will read it for you.
What we do in Grimes

Four jobs, one crew.

Stump grinding

Cut to grade, ground 6 to 8 inches down, grindings raked level so you can mow over it.

The standard job →

Stump removal

Whole root ball out, for replanting, a patio, a fence post, or a stump that has lifted the concrete.

Full extraction →

Root grinding

Surface roots ground flush where they cross the lawn, the driveway, or the sidewalk.

Flush to grade →

Chip haul-away

Leave the grindings as mulch, or have them hauled off and screened topsoil brought in.

Optional add-on →
Pricing in Grimes. Grimes jobs are usually one or two red maples plus a row of pear stumps along a driveway. Count matters more than anything else, because the machine is already on site.
The day of the job

What to expect, marks and all.

Honest version: a grinder is heavy equipment, the hole will settle, and the lawn is not a golf course when we leave. Here is what is normal and what is not.

Track and tire marks

Expect them on the approach and around the stump. Turf recovers in a week or two, and wet ground is the one case where we reschedule rather than chew up a yard. Wet ground is the one case where we reschedule.

Chips on the lawn

Grinding throws chips a few feet past the hole. We rake the bulk up and blow off hard surfaces. A light scatter in the grass is normal and disappears with the next mow.

A hole that settles

We fill and rake it level, then it drops an inch or two over the first season. That is ground wood breaking down, not a bad fill job. Top it off before seeding.

No seed, no sod

We leave it graded and ready. Seeding is yours, and on a deep grind you may need extra soil first. We tell you the depth so you know what you are working with.

Before we grind

Four things that keep the job simple.

Flag the private lines

Irrigation, dog fence, landscape lighting, and a gas line to a grill or shed are not marked by 811. Point them out, or mark them yourself, before we start.

Clear 3 feet around it

Hoses, toys, planters, the grill, and the dog. A grinder throws chips and does not stop for a hose reel.

Open the gate you want used

36 inches is the number that decides which machine shows up. Tell us the width, and whether there is a step or a slope.

Move the cars

Chips travel. If the stump is near the drive, park on the street that morning and we will leave the concrete clean.

Example jobs around Grimes

Recent shapes of work. Swap these for real photos and job notes once the operator is on board.

NeighborhoodStumpWhat we did
North of Highway 14118 in red maple, side yardGround 6 in, gate access, chips hauled
Downtown Grimes32 in silver mapleGround 8 in, hole filled, raked level
Subdivision driveway6 ornamental pearsOne visit, chips left as mulch
Questions from Grimes

What homeowners here ask.

Do you cover the acreages west of Grimes?

Yes. Granger, Dallas Center and the acreages along Highway 44 are all inside our normal route, and a trip out that way is easy to schedule. Send your ZIP and we will confirm the drive before quoting.

Do I need a permit to grind a stump in Grimes?

Not on your own property. Grimes does have rules about trees in the city right of way, and parkway strips near the street are the case to ask about. Tell us where the stump sits and we will check before anything is ground.

What if I don't know what kind of tree it was?

It does not matter for the quote. We price the stump by diameter and access, not by species, so you never need to identify the tree to get a number. If we need the species for depth or regrowth, we can usually tell from the bark, the wood grain, the color of the cut, the suckers, and what is growing nearby. A stump that has been down for years is sometimes too far gone to name, and it still grinds the same way.

Will your equipment mark up my yard?

Yes, some, and we would rather tell you now than surprise you. A stump grinder is a heavy machine on soft ground, so expect track or tire marks on the approach, a ring of disturbed soil around the hole, and chips thrown a few feet onto the lawn. We keep the machine on the driveway or the gravel where we can, and we tell you before we start if the ground is too soft to work. Turf recovers in a week or two. Wet spring ground is the case where we reschedule instead of leaving ruts.

Will the hole settle after you fill it?

It will, and you should plan for it. Ground wood and soil keep settling for a season, usually an inch or two and more on a big stump. Top it off with a bag or two of soil before you seed, then check it again the next spring. That settling is normal, it is why we do not promise a finished lawn, and it is the one follow up on a stump job worth doing.

Do you seed or sod the spot?

No. We leave the hole filled and raked level with the surrounding grade, ready for you to seed or sod. Seed is a small job: rake it loose, spread seed, add straw, water it for a couple of weeks. Ask us the depth we ground to, because if it is deeper than about six inches you will want another inch or two of soil on top first.

Does the size of the stump change the price?

Yes, size is the biggest factor. Diameter at ground level decides how much wood the wheel has to remove, and a stump twice as wide holds far more than twice the wood. Species only changes how long the machine runs, and your quote is per stump, so there is no discount for a dead ash and no surcharge for a live oak. The number we give you is the number you pay.

Nearby service areas

Stump in the way in Grimes?

Free estimate, firm price, most jobs scheduled within the week. Send your ZIP and we will have questions and a number for you today.

Get my free estimate

Three fields. Takes about 15 seconds.