Red maple
Planted across nearly every subdivision built since the 1990s. Shallow rooted, first to split in an ice storm, and usually 12 to 24 inches at the base. Fast to grind and the most common stump we see on newer lots.
Des Moines Stump Grinding › Service areas › Stump grinding in Ankeny, IA
Stump grinding & removal · Ankeny, Iowa
Stump grinding in Ankeny, new lots and old farmsteads.
Ankeny grew fast and most of the trees came with the houses. Prairie Trail, Otter Creek and the neighborhoods off Oralabor are full of red maples, ornamental pears and pines that are 8 to 20 inches across, which is a fast grind. The older farmstead lots on the north side are the opposite.
- Free estimate in Ankeny
- Most jobs within the week
- Cleanup included
Grind depth quoted in inches.
811 locate before every job.
Get a free estimate
Three fields. We call you back with a price, usually the same day.
Tree coverRed maple, ornamental pear, white pine, arborvitae, volunteer hackberry
Typical stump8 to 20 inches on new lots, 30 inches and up on farmsteads
AccessFresh sod, invisible fences, narrow side yards between new builds
Local detail
What Ankeny stumps are actually like.
New construction leaves stumps in odd places: builder stumps behind a shed, saplings in the easement, a row of arborvitae the last owner planted on the property line. We grind those in place and mulch them, with no burn pile and no hauling.
We grind 6 to 8 inches below grade as standard, deeper if you are replanting or setting a post. Grindings go back in the hole and get raked level, and the driveway gets blown off before we leave.
Neighborhoods we cover
- Prairie Trail
- Otter Creek
- Briarwood
- Oralabor corridor
New sod and young landscaping change how we get in. We stay off fresh sod where we can, and we ask about irrigation and invisible dog fences before the machine comes off the trailer.
| Ankeny stump profile | What it means for your job |
|---|---|
| Housing era | 1990s to present in most of the city, early 1900s farmsteads on the north side |
| Common species | Red maple, ornamental pear, white pine, arborvitae, volunteer hackberry |
| Typical stump | 8 to 20 inches on new lots, 30 inches and up on farmsteads |
| Access | Fresh sod, invisible fences, narrow side yards between new builds |
Trees and stumps
The stumps you are most likely to have in Ankeny.
Species matters more than people expect: it decides how hard the wood is, how wide the base spreads, and how long the roots sit in the ground before they rot.
Ornamental pear
The builder tree of choice. Shallow roots, brittle in ice, usually 8 to 14 inches at the base. Ten of them along one driveway grind in a single pass.
White pine
Soft wood and sticky resin. Grinds quickly, but pine chips are better hauled than left in a planting bed where they mat down.
Hackberry
The volunteer in every fence line and easement. Usually a cluster of small stems, ground as one job in one pass.
Sizing it up
How big is your stump, and what does that change?
Diameter at the base is the number that drives time, chips and equipment. Measure across the widest point where the trunk meets the ground, not the height.
| Stump size | What it usually takes | Worth knowing |
|---|---|---|
| Under 12 in | Mostly ornamental and builder stumps. 15 to 30 minutes, half a wheelbarrow of chips. | Cheapest per stump, especially several in one yard. |
| 12 to 24 in | The most common residential stump in the metro. 30 to 45 minutes, about one wheelbarrow. | Standard 6 to 8 inch grind, grass comes back over it. |
| 24 to 36 in | Mature yard trees. 45 to 90 minutes, two to three wheelbarrows. | Ask about hauling if the chips would sit in view. |
| 36 in and up, or multi-stem | Old silver maple, elm, walnut, and multi-trunk ornamentals. One to three hours, three or more barrow loads. | Depth matters here. Replanting or setting a post means grinding deeper. |
Time bands are typical, not a promise. Access, depth and what is buried nearby all move them. If you are not sure how wide yours is, put a tape measure or a shovel across the base in the photo and we will read it for you.
What we do in Ankeny
Four jobs, one crew.
Stump grinding
Cut to grade, ground 6 to 8 inches down, grindings raked level so you can mow over it.
The standard job →Stump removal
Whole root ball out, for replanting, a patio, a fence post, or a stump that has lifted the concrete.
Full extraction →Root grinding
Surface roots ground flush where they cross the lawn, the driveway, or the sidewalk.
Flush to grade →Chip haul-away
Leave the grindings as mulch, or have them hauled off and screened topsoil brought in.
Optional add-on →Pricing in Ankeny. Ankeny quotes usually come down to count. Five 12 inch red maple or pear stumps on one lot price better per stump than one, because the machine is already there and set up.
The day of the job
What to expect, marks and all.
Honest version: a grinder is heavy equipment, the hole will settle, and the lawn is not a golf course when we leave. Here is what is normal and what is not.
Track and tire marks
Expect them on the approach and around the stump. Turf recovers in a week or two, and wet ground is the one case where we reschedule rather than chew up a yard. Wet ground is the one case where we reschedule.
Chips on the lawn
Grinding throws chips a few feet past the hole. We rake the bulk up and blow off hard surfaces. A light scatter in the grass is normal and disappears with the next mow.
A hole that settles
We fill and rake it level, then it drops an inch or two over the first season. That is ground wood breaking down, not a bad fill job. Top it off before seeding.
No seed, no sod
We leave it graded and ready. Seeding is yours, and on a deep grind you may need extra soil first. We tell you the depth so you know what you are working with.
Before we grind
Four things that keep the job simple.
Flag the private lines
Irrigation, dog fence, landscape lighting, and a gas line to a grill or shed are not marked by 811. Point them out, or mark them yourself, before we start.
Clear 3 feet around it
Hoses, toys, planters, the grill, and the dog. A grinder throws chips and does not stop for a hose reel.
Open the gate you want used
36 inches is the number that decides which machine shows up. Tell us the width, and whether there is a step or a slope.
Move the cars
Chips travel. If the stump is near the drive, park on the street that morning and we will leave the concrete clean.
Example jobs around Ankeny
Recent shapes of work. Swap these for real photos and job notes once the operator is on board.
| Neighborhood | Stump | What we did |
|---|---|---|
| Prairie Trail | 9 builder stumps under 12 in | One visit, ground flush, chips hauled |
| North side farmstead | 16 arborvitae along a property line | Ground and mulched in place |
| Otter Creek | 30 in windbreak pine | Ground 8 in, topsoil backfill, raked level |
Questions from Ankeny
What homeowners here ask.
Can you grind a stump without wrecking new sod?
Usually. We keep the tracks on the driveway or the gravel where we can, and we tell you before we start if the ground is too soft. Wet ground after a storm is the one case where we reschedule rather than rut a new lawn.
The stump is right on the property line. Who books the job?
One owner books it and the other agrees before we start. Grinding does not move the property line, but the chips, the hole and the machine all cross it. A text between neighbors before the job saves an awkward conversation after.
What if I don't know what kind of tree it was?
It does not matter for the quote. We price the stump by diameter and access, not by species, so you never need to identify the tree to get a number. If we need the species for depth or regrowth, we can usually tell from the bark, the wood grain, the color of the cut, the suckers, and what is growing nearby. A stump that has been down for years is sometimes too far gone to name, and it still grinds the same way.
Will your equipment mark up my yard?
Yes, some, and we would rather tell you now than surprise you. A stump grinder is a heavy machine on soft ground, so expect track or tire marks on the approach, a ring of disturbed soil around the hole, and chips thrown a few feet onto the lawn. We keep the machine on the driveway or the gravel where we can, and we tell you before we start if the ground is too soft to work. Turf recovers in a week or two. Wet spring ground is the case where we reschedule instead of leaving ruts.
Will the hole settle after you fill it?
It will, and you should plan for it. Ground wood and soil keep settling for a season, usually an inch or two and more on a big stump. Top it off with a bag or two of soil before you seed, then check it again the next spring. That settling is normal, it is why we do not promise a finished lawn, and it is the one follow up on a stump job worth doing.
Do you seed or sod the spot?
No. We leave the hole filled and raked level with the surrounding grade, ready for you to seed or sod. Seed is a small job: rake it loose, spread seed, add straw, water it for a couple of weeks. Ask us the depth we ground to, because if it is deeper than about six inches you will want another inch or two of soil on top first.
Does the size of the stump change the price?
Yes, size is the biggest factor. Diameter at ground level decides how much wood the wheel has to remove, and a stump twice as wide holds far more than twice the wood. Species only changes how long the machine runs, and your quote is per stump, so there is no discount for a dead ash and no surcharge for a live oak. The number we give you is the number you pay.
Nearby service areas
Stump in the way in Ankeny?
Free estimate, firm price, most jobs scheduled within the week. Send your ZIP and we will have questions and a number for you today.
Get my free estimate
Three fields. Takes about 15 seconds.